Machine Embroidered Hardanger
Machine embroidered what? In case you’re not up on traditional hand embroidery techniques, hardanger is a type of drawn-thread work done on even weave fabric, often linen or cotton, and traditionally in white. It gets it’s name from a region in Norway although the technique itself can be traced back to more ancient cultures.
Drawn Thread Work
I guess I should explain what drawn thread work even is. This is a technique where you pull out rows of threads in the fabric. Stitching is done along the edges and the remaining fabric threads may be worked together by hand to form patterns or create woven bars. In some areas, threads from both directions are cut away, You can see an example of traditional hardanger in this photo snatched off wikipedia: 
The reason we can’t take this approach with machine embroidery is because we just can’t hoop accurately enough. The process of getting the fabric between the rings of the hoop distorts the grain and it would be impossible to precisely sew the stitches where you wanted them and keep them exactly in line with the weave of the fabric.
Machine Embroidered Still Involves Hand-Work
With machine-embroidered hardanger, we can get the machine to do all the stitching for us but we still need to do the cutting. Yes, there are attachments for some specialty commercial machines and Bernina has one (I haven’t actually seen it yet) but with a good pair of scissors and some patience, you can do it yourself.
For machine embroidery, we treat the design like a cross between cutwork and free-standing embroidery. You’ll hoop a suitable fabric with a water soluble stabilizer (use the fiber type, not a film), and the design will sew the outlines of the area(s) you need to remove. Next, remove the hoop from the machine and carefully cutaway the fabric without cutting through the stabilizer. Finish sewing the design and soak out the stabilizer.
What About Fabric Dissolving Products?
In the past, I’ve also used a product called Fiber Etch. It came in a bottle with a nozzle and you could just draw a bead of it onto your fabric and it would dissolve natural plant fibers like cotton, linen, and rayon. If you accidentally squirted too much, or it ran over the “thread wall” defining your cut area, well then you were hosed. Also, you had to wait for it to dry before continuing the sewing process. If you’re using a water soluble stabilizer, you must make sure that the Fiber Etch does not soak through to the backing. Finally, it will limit your choice of embroidery threads to polyesters.
Why Can’t You Cut the Stabilizer?
In the example shown here, I’ve scanned the embroidery with a piece of blue paper placed behind it. The bars are sewn onto the stabilizer. The stitching needs something to form over and that’s the purpose of the stabilizer. This is the part of the design I referred to as “free standing” and if you’ve ever embroidered free-standing lace, you know how it works.
New Design Collection from Lindee G Embroidery
To reproduce the look of traditional hardanger, I started by researching the styles and techniques used in hand-embroidered hardanger, including a sampler I worked back in the 1970′s. I wanted authentic looking designs. After about a month of research and sketching, I started digitizing and experimenting with the best way to get a traditional look that was versatile and would stand up to some use. While many of the designs in this collection can be used stand-alone, they are really meant to be combined. The sample shown at the beginning of this post is sewn on linen and combines two cutwork designs with 3 different elements. 36 designs complete the collection. Five designs require hoops larger than 4×4″ (100x00mm).
What to Do With the Designs
While the cutwork areas are certainly beautiful, they do add to the time it takes to sew the design and they can reduce durability. You don’t have to cut the fabric away, which would solve both issues. Another solution would be to hoop a second piece of fabric behind your stabilizer, perform the cutwork, and then when the project is done, you’ll have the other fabric show through for added interest and stability.
For the candle wrap shown here, I used designs #6, 13, and 26. Design 13 is simply a rectangle with a fancy inside edge that can be treated as an applique. Applique it to a sturdy water-soluble (I use fiber-based products not film), then add design 6 and finally pick an element to drop into the center area if desired.
Design 6 would also make a great front placket on a blouse (add a button hole design where I put the element) or cuffs for a woman’s blouse.
An abbreviated version of design 6 is included that would make great napkin rings to coordinate with the candle wrap.
Special Intro Price for July–Save $10
From now through the end of July 2010, save $10 off the price of this collection, which means you get each design for $1.38. The collection is available for immediate download and you can choose either Generations format (.gen) or multi-format.
Multi-format includes most common machine formats (except .art). The two groups are separated because the .gen format is huge and it would just inflate the download excessively for most users. Note that designs are only converted if they will fit the maximum supported sewing field for the format. Each download includes a full-color pdf flyer of all the designs plus an illustrated instruction pdf for the sewing and cutting process.
- Hardanger collection in multi-format (dst, exp+, csd, hus, jef, pcm, pcs, pes, sew, shv, vip, vp3, xxx). 36 designs, instructions, color pdf with color sequences, color flyer of designs. Regularly $59.95 on sale through 7/31/2010 for $49.95. Instant download available for lg003-mf.
 |
Hardanger Collection
Instant download! |
- Hardanger collection in Generations (.gen)-format. 35 designs in native .gen format (not as building blocks) plus one dst file. Includes instructions, color pdf with color sequences, color flyer of designs. Regularly $59.95 on sale through 7/31/2010 for $49.95. Instant download available for lg003-gen.
Note that one design (#13, the applique border and the simplest one in the collection by normal thinking) is not available in .GEN format and is provided in DST format only. This is because after 3 hours of fooling around with it in the program, I was simply unable to get a suitable result. It took 3 minutes to digitize in Punto.
|
$59.95
|
Digitizing Hardanger
Even though I digitized these in Generations (I’m making myself learn the program and only use this software if possible), they were not auto-digitized. Nor were the designs digitized from clip art. For the most part, stitches used in hardanger are runs and satins. Theoretically it should be possible to do them in the most basic digitizing program. If you’d like to learn more about digitizing hardanger, I recorded a free webinar on the process on 7/8/2010 for the Generations Digitizing Workshop. Although I demo in Generations, the technique can easily be transferred to other programs.
Moving Beyond “Plop and Drop”
Aren’t you tired of all the tons of cutesy designs that proliferate on the net? Why not put a little time and effort into your projects and create something truly worthy of passing down? You got your embroidery machine to allow you creative freedom. Why not use high quality beautiful design that let you do it? Designs are inexpensive compared to your machine investment.
Want to More Behind the Scenes Stuff?
I wrote a little bit about the design process on one of my other sites. If you want to know more, hop on over.
Related Posts
Notice: The copyright of the article Machine Embroidered Hardanger is owned by Lindee Goodall. Permission to republish Machine Embroidered Hardanger in print or online must be granted by the author in writing. Here are articles I have written that you can freely use as long as you retain my bio info.
